Vu+ Solo2 Nand flash chip U502 Connections

Discussion in 'VuPlus Solo2 Schematic drawings, Pcb images etc..' started by Johnny B., Jan 13, 2018.

  1. Johnny B.

    Johnny B. Technical Support Staff Member Moderator

    Messages:
    2,816
    Likes Received:
    1,501
    Trophy Points:
    113
    Gender:
    Male
    Location:
    Netherlands
    Home Page:
    Could be handy to see how the Nand flash chip U502 has being connected so that you could make a alternative connection if you have a interrupted track to the nand chip.
    But also handy for measure the ohm values to see if all the used pins are connected.

    Measure it between the ground and the measurement spot.
    And because the pins are small to measure, use a needle probe, or add a needle to your red probe to measure it.


    solo2-nandchip-tracks.jpg