vu solo2 mini Blue light and no video

Discussion in 'VuPlus Solo2 Hardware troubles and Repair support.' started by malpi, Apr 16, 2017.

  1. malpi

    malpi Member

    Messages:
    182
    Likes Received:
    12
    Trophy Points:
    18
  2. malpi

    malpi Member

    Messages:
    182
    Likes Received:
    12
    Trophy Points:
    18
    This made the process of SOLO2 FLASH MCU TOOL and it does it right but it does not boot the usb
     
  3. Johnny B.

    Johnny B. Technical Support Staff Member Moderator

    Messages:
    2,822
    Likes Received:
    1,504
    Trophy Points:
    113
    Gender:
    Male
    Location:
    Netherlands
    Home Page:
    The files were for as far as I see it for another type motherboard, the one you now show is at least different.
    But search with google to vu solo2 mini jtag and see if you can fix it with the Jtag(I2c) cypress board.
     
  4. malpi

    malpi Member

    Messages:
    182
    Likes Received:
    12
    Trophy Points:
    18
    Good at the end change the flash and burn the bootloader
    But gives me the following error
    34.60012

    BCM7356B2 CFE Build Date: Fri Nov 23 11:23:42 2012 Vuplus team
    Copyright (C) Broadcom Corporation.

    CPU speed: 1305MHz
    Total memory (0): 1024MB
    DDR Freq: 800 MHz
    DDR Mode: DDR3
    DEV TECH: 2048MBIT
    DDR Width: 32
    Boot Device: NAND
    Total flash: 256MB

    Initializing USB.
    USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
    USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
    USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
    USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
    Saving shmoo values ...
    Saved shmoo values ....

    CFE initialized.
    USB: New device connected to bus 1 hub 1 port 1
    USB: Resetting device on bus 1 hub 1 port 1
    USB: Locating Class 08 Vendor FFEE Product 0100: Mass-Storage Device
    USBMASS: Unit 0 connected
    Waiting for usb ... done
    Checking usb
    No Usb Priority
    Checking front key
    ReadFrontKey 0 0
    Checking usbdisk0: /vuplus/solo2/ignore.update ...... NO
    Checking usbdisk0: /vuplus/solo2/force.update ...... NO
    Checking usbdisk0: /vuplus/solo2/cfe_cfe_auto.bin ...... NO
    Checking usbdisk0: /vuplus/solo2/root_cfe_auto.bin ...... YES
    Checking usbdisk0: /vuplus/solo2/splash_cfe_auto.bin ...... YES
    Checking usbdisk0: /vuplus/solo2/kernel_cfe_auto.bin ...... YES
    Checking usbdisk0: /vuplus/solo2/reboot.update ...... YES
    Waiting for update key
    ACK:
    ReadFrontKey 0x0
    ACK:
    ACK:
    ReadFrontKey 0x0
    ACK:
    ACK:
    ReadFrontKey 0x0
    ACK:
    Skipping USB Update
    Starting splash screen.
    No image found in flash0.splash - disabling splash

    Loader: elf Filesys: raw Dev: flash0.kernel File: Options: ubiroot rootflags = sync bmem = 192M @ 64M bmem = 256M @ 512M
    Loading: Failed.
    Could not load: I / O error
    Trying again with '-nz' option
    Loading: Failed.
    Could not load: Not an ELF-format executable
    ">CFE>
     
  5. Johnny B.

    Johnny B. Technical Support Staff Member Moderator

    Messages:
    2,822
    Likes Received:
    1,504
    Trophy Points:
    113
    Gender:
    Male
    Location:
    Netherlands
    Home Page:
    Could be due the usb stick, try some other sticks maybe it helps.
     
  6. malpi

    malpi Member

    Messages:
    182
    Likes Received:
    12
    Trophy Points:
    18
    Ok perfect I put the openatv and running perfectly thanks a lot of heart
    It was image problem was not correct
     
    Johnny B. likes this.