Skybox Mini Solo VuJ chip modification

Discussion in 'Securitychip to VuJ Chip modification information.' started by Johnny B., Jan 21, 2018.

Tags:
  1. Johnny B.

    Johnny B. Technical Support Staff Member Moderator

    Messages:
    2,822
    Likes Received:
    1,504
    Trophy Points:
    113
    Gender:
    Male
    Location:
    Netherlands
    Home Page:
    This box is tested on the VuJ chip and seems to work fine with the latest openpli original solo image file.
    Of course it will also work on the Solo/Duo security chip modules but these are hard to get.

    When you decide to convert your Skybox mini solo than you need to add a connector for it.
    The Rx / Tx connections are not really necessary, you could leave these connections.
    The most important connections are the Sda / Scl and of course the ground and the 3.3v

    I give here a picture how it can be done.

    Click on the picture if you like to see the full picture.
    Skybox Mini Solo VuJ chip mod.jpg