i have dm800se v2 sim2.10 my box is show error R01 NO CA FOUND on dm800se v2 sim2.10 kindly give me solution and advice. thanks
This could be an wrong flashed issue, flash the box on the correct way. Use the correct bootloader, one that is suitable for the sim 2.10 card, and flash the sim 2.10 software on it. Also, best way is to do this all with a windows xp system. More about this, see this picture... Click on it when you like to see a full view
As for the boot loader, you need the sim2-ssl84d, and a dm800se sim210 84D image file. If you want the latest sim2.10 image files then use the google search, searching to, 800hdseV2 sim2.10 #84d downloads Further it depends if your box is an original, or clone, and it may also be a Sunray clone box. Be sure which box you have, otherwise you could use the wrong files for it and may results into the issue you now have. By doubts, show me a picture of the motherboard from it, then I may see which one you have. Otherwise, just try some, but the easiest way to at least fix the no ca found issue is to use the optiflasher for it. The boot repair function is free to use, you need only to pay for it when you want to use the other extra options.
Dm 800se V2 was released with sim 2.20 ( ssl 88/ssl89) Dm800Se was released with Sim 2.10 (ssl 84D) Both were the sunray team released . before to get proper image you must have to confirm which box actually you have .
Only SSL88 exist for DM800HDse V2 Sim2, The only team that has the latest software and SSL89J is the Japhar Team / Sim. TS