Hello, I ask you to help me urgently I believe that my DM 900 is dead See the log. Console log: [*] Remounting '/dev/mmcblk0p3' to '/data' [*] Downloading 'http://dreamboxupdate.com/download/recovery/dm900/release/recovery.sig' [*] Copying 'recovery' from local storage [*] Verifying signature of 'recovery' gpgv: Signature made Wed Dec 21 02:02:08 2016 UTC using RSA key ID 7DA27561 gpgv: Good signature from "Dreambox DM900 Recovery <dm900@recovery.dreambox.de>" [*] Unmounting '/data' [*] Running './recovery' [*] Options '-v -b -r' [*] Mounting '/dev/mmcblk0p3' to '/data' [*] Downloading 'http://dreamboxupdate.com/download/recovery/dm900/release/dreambox-image-dm900.tar.xz.sig' [*] Downloading 'http://dreamboxupdate.com/download/recovery/dm900/release/dreambox-image-dm900.tar.xz' [*] Verifying signature of 'dreambox-image-dm900.tar.xz' gpgv: Signature made Sat Dec 10 00:27:46 2016 UTC using RSA key ID 7DA27561 gpgv: Good signature from "Dreambox DM900 Recovery <dm900@recovery.dreambox.de>" [*] Mounting '/dev/mmcblk0p2' to '/mnt' sed: /mnt/etc/shadow: No such file or directory [*] Unmounting '/mnt' [*] Unmounting '/data' Fatal: Failed to execute './recovery'
Sorry, I've never worked with the recovery option. The first thing I did was changing the software for OpenAtv and works in my case flawless, even with the online updates. But searching for it, I saw this topic on another forum. Maybe it helps you.
I has seem this problem.....have sent back to dreambox to repair and get it but my box is fail!! can not to connect LAN port.
I think, 1. keep putty connected. 2. connect network also. 3. set the box in recovery mode and see in putty the output. Maybe you see more as the ip request results etc.
Hi friends I have a big problem with my dm 900 After 4 days that my dreambox worked.the front display of my dream became white and does not show anything more. What should i do now??????? I took a picture from that . And you can see it in attached
Normally I would say, if you still have guarantee on the box make contact to your seller. Which is the best advice. But since you already have opened the box you could try to remove, and reinsert the flat cables back in to the connectors. Maybe one of the flat cable sides are not placed well, so maybe it helps. This could be done to open up by the black strip. Like my picture shows from the motherboard. It presses the ribbon cable on the contacts, when open you can remove the flat cable. Remove the cable, put it back and close the lock. It can be clipped up with your nail or a plastic thin object, but do not use extreme force, or you could break it. But still it's you own decision if you do it, when it goes wrong you could lose your guarantee.