Problem dreambox one not booting

Discussion in 'General information.' started by biko_73, Jul 17, 2021.

Tags:
  1. biko_73

    biko_73 New Member

    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    1
    Gender:
    Male
    I put the dreambox two bootloader on my dreambx one and the device is no longer connected by the network

    It only connects to com via putty, Tera Term and ZOC8 Terminal but only appears like this

    [​IMG]

    [​IMG]

    [​IMG]

    Only this connects to the ZOC8 Terminal
    But I don't know what to do
    Notice how it connects

    [​IMG]

    The only Program (ZOC8 Terminal) that brings information attached.
    The rest of the programs contact, but a black screen displayed

    [​IMG]

    Can advice how to solve this problem , Thanks' in advance
     

    Attached Files:

  2. Johnny B.

    Johnny B. Technical Support Staff Member Moderator

    Messages:
    2,505
    Likes Received:
    1,285
    Trophy Points:
    113
    Gender:
    Male
    Location:
    Netherlands
    Home Page:
    Unfortunately I have no experience with the Dreambox One, and Two so I'm afraid I can't help you with it.

    Maybe someone else is be able to help you with it, therefore my best advice is to wait for that.
     
    toysoft and biko_73 like this.
  3. toysoft

    toysoft Well-Known Member Staff Member

    Messages:
    437
    Likes Received:
    537
    Trophy Points:
    93
    Gender:
    Male
    Location:
    Switzerland
    Home Page:
    Did you tried the trick of the SD card ?

    - Flashing with SD Card
    Create a partition with an ext or FAT file system labeled as "DREAMFLASH" on the USB device.

    See if you can access the box (it gets an IP ?), etc.

    TS
     
    biko_73 and Johnny B. like this.
  4. toysoft

    toysoft Well-Known Member Staff Member

    Messages:
    437
    Likes Received:
    537
    Trophy Points:
    93
    Gender:
    Male
    Location:
    Switzerland
    Home Page:
    1) The above is to flash an image to the box directly booting the SD,

    For DM520HD:
    Create a partition with an ext or FAT file system labeled as "DREAMFLASH" on the USB device. Then copy the imagefile to the device and rename it, if necessary, to dreambox-image-dm520.tar.xz (for DM520HD, and choose the right image for the box naturally), then plugin the device and reboot the dreambox.

    2) you also have the boot problem fix,

    You need to format a SD Card in FAT, then name it "DREAMBOOT", and put it on the SD reader. Then turn on the box and it should stop during first steps of boot and you should be able to connect with Putty in COM mode to the service port. Using then the console to send all proper commands to restore the box.

    But this to work, you should have the console/putty working, and this is why we asked you few times to check/be sure the console works on the service port... so try another PC as I am still very surprised that you have nothing on your Putty console during startup of box.

    TS
     
    biko_73 and Johnny B. like this.
  5. biko_73

    biko_73 New Member

    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    1
    Gender:
    Male
    @toysoft
    Thank you for your interest, I will try what you recommended and feed back