No signal Tuner Dreambox 800 Clone

Discussion in 'DM800HD Hardware troubles and Repair support.' started by alijassim, Mar 9, 2019.

  1. alijassim

    alijassim New Member

    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    Gender:
    Male
    I have dreambox 800 clone with sim201 and Black Hole Image 4.7.. My receiver detected the tuner (BSB2-801A Rev:M) but there aren't signals of Nilesat Satellite.. I changed the image of my DM but the problem wasn't solve.. I brought another receiver and it was detect the signals without problem.. I looked for new tuner in my own town but I didn't find it.. I read in other site that is away to get a signal back by make a connection between two tuners of two receivers (dreambox + another) and it was success to get one POL (Horizontal or Vertical only) depended on the POL of channel in the second receiver.
    Now, I need your help to solve this problem.
     

    Attached Files:

  2. Johnny B.

    Johnny B. Technical Support Staff Member Moderator

    Messages:
    2,523
    Likes Received:
    1,301
    Trophy Points:
    113
    Gender:
    Male
    Location:
    Netherlands
    Home Page:
    I wish I could help you with it but unfortunately I have no experiences with the Nilesat satellite.
    But since you have this issue with the RevM tuner, then it maybe helps when you do the resistor 510ohm modification when that is not present on the motherboard.
    More about it, see here, see the TIP: Tuner issue.
    I'm not claiming that it will help, but it's a thought.

    Or else, maybe other visitors has more experiences with this Nilesat satellite settings.