No boot 500HD

Discussion in 'Hardware troubles and Repair support.' started by Mama, Mar 10, 2020.

  1. toysoft

    toysoft Well-Known Member Staff Member

    Messages:
    439
    Likes Received:
    541
    Trophy Points:
    93
    Gender:
    Male
    Location:
    Switzerland
    Home Page:
    Flash the SSL84.NFI file into the box with JapharFlasher (and check to be sure the Network option is turned off).

    SSL84 DM500HD :
    Code:
    http://sources.dreamboxupdate.com/download/7020/secondstage-dm500hd-84.nfi
    TS
     
    Mama and Johnny B. like this.
  2. Mama

    Mama Member

    Messages:
    34
    Likes Received:
    3
    Trophy Points:
    8
    Gender:
    Male
    I checked the SIM card was original. I turned on the Netcraft option on the japharflasher but the flashing lights on the back of the box with the lan cable on did not turn on
     
  3. Mama

    Mama Member

    Messages:
    34
    Likes Received:
    3
    Trophy Points:
    8
    Gender:
    Male
    Stays in checksum mode. I test it any way it stays.
     
  4. toysoft

    toysoft Well-Known Member Staff Member

    Messages:
    439
    Likes Received:
    541
    Trophy Points:
    93
    Gender:
    Male
    Location:
    Switzerland
    Home Page:
    You need to remove the "v" option of Network when you use JapharFlasher, as you will only use the USB cable from Box to PC. If your RJ45 is broken, it will naturally not turn on the lights on it.

    Try then the optiflasher, there is a free version, to flash the SSL for it (all is built-in).

    TS
     
    raza05 and Mama like this.
  5. Mama

    Mama Member

    Messages:
    34
    Likes Received:
    3
    Trophy Points:
    8
    Gender:
    Male
    Please send me the free version of optiflasher
     
  6. Mama

    Mama Member

    Messages:
    34
    Likes Received:
    3
    Trophy Points:
    8
    Gender:
    Male
    The lan port was created but it will not accept images with dreamup or Japharflasher, only accept IP images.I hit the image too, but until I turn on the receiver, the headlight turns green for a moment and quickly turns red.
     
  7. toysoft

    toysoft Well-Known Member Staff Member

    Messages:
    439
    Likes Received:
    541
    Trophy Points:
    93
    Gender:
    Male
    Location:
    Switzerland
    Home Page:
    raza05, Johnny B. and Mama like this.
  8. Mama

    Mama Member

    Messages:
    34
    Likes Received:
    3
    Trophy Points:
    8
    Gender:
    Male
    The SIM card is flawless. I can easily flash with the web browser but with dremup or japharflasher staye on the checksum mode.
    this version optiflasher not free
     
  9. toysoft

    toysoft Well-Known Member Staff Member

    Messages:
    439
    Likes Received:
    541
    Trophy Points:
    93
    Gender:
    Male
    Location:
    Switzerland
    Home Page:
    So if you can flash with WebInterface... then flash with webinterface...

    TS
     
    raza05, Mama and Johnny B. like this.
  10. Mama

    Mama Member

    Messages:
    34
    Likes Received:
    3
    Trophy Points:
    8
    Gender:
    Male
    After flashing, the receiver will remain on the red light and will not boot
     
  11. toysoft

    toysoft Well-Known Member Staff Member

    Messages:
    439
    Likes Received:
    541
    Trophy Points:
    93
    Gender:
    Male
    Location:
    Switzerland
    Home Page:
    Ok, which image are you flashing (name of file nfi and link to download it, so we can check it).

    Please use the usb cable with Putty software set to 115200 bps and correct COM port to log from the moment you start the box until it stays freezed and give us the log file so we can see the messages the box is giving out. It would help to understand the exact problem.

    TS
     
    raza05, Mama and Johnny B. like this.
  12. Mama

    Mama Member

    Messages:
    34
    Likes Received:
    3
    Trophy Points:
    8
    Gender:
    Male

    Attached Files:

    • 1.jpg
      1.jpg
      File size:
      109.4 KB
      Views:
      61
    • 2.jpg
      2.jpg
      File size:
      122.9 KB
      Views:
      57
    Last edited: Mar 14, 2020
    toysoft likes this.
  13. toysoft

    toysoft Well-Known Member Staff Member

    Messages:
    439
    Likes Received:
    541
    Trophy Points:
    93
    Gender:
    Male
    Location:
    Switzerland
    Home Page:
    We need more from the log, you can save the full text of the Putty into a file, and attach it here to a post. As it shows for now that the SSL84 is properly loaded and is correct, but then we cannot see what else happens after.

    On the top left of the Putty window, you have the options and can save all the log into a text file, to attach here to a message.

    TS
     
    raza05, Mama and Johnny B. like this.
  14. Mama

    Mama Member

    Messages:
    34
    Likes Received:
    3
    Trophy Points:
    8
    Gender:
    Male
    =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2020.03.15 04:02:51 =~=~=~=~=~=~=~=~=~=~=~=
    Code:
    BCM74050011
    012
    K1
    K2
    
    K3
    
    K4
    
    K5
    
    Shmoo Version=3.2
    DDR Freq=0x0000018C
    %00000001%
    RC1=00000001
    WC1=FFFFFFF8
    RC2=00000011
    WC2=00000012
    RC3=00000009
    WC3=FFFFFFF9
    RC4=00000009
    WC4=0000003A
    NWC=00000019
    RC5=00000001
    WC5=00000019
    RC6=00000011
    WC6=00000019
    NRC=00000009
    RW=00000011
    WW=00000042
    G=00000000 R=00000009 W=00000019
    BL=00000000
    RC1=00000000
    RC2=00000010
    
    BL=00000001
    RC1=00000000
    RC2=00000010
    
    BL=00000002
    RC1=00000000
    RC2=00000010
    
    BL=00000003
    RC1=00000004
    RC2=00000012
    
    BL=00000004
    RC1=00000000
    RC2=00000011
    
    BL=00000005
    RC1=00000001
    RC2=00000017
    
    BL=00000006
    RC1=00000000
    RC2=00000014
    
    BL=00000007
    RC1=00000000
    RC2=00000015
    3
    COPY CODE
    COMPARE CODE
    4567
    (c) 2007,2008 Dream Multimedia GmbH. All rights reserved.
    
    Dreambox D M500HD
    
    FIRST STAGE 1.0/400 {BO23456}
    [m
    
    2ND STAGE OK, build #84 (2011-09-01)
    
     
  15. toysoft

    toysoft Well-Known Member Staff Member

    Messages:
    439
    Likes Received:
    541
    Trophy Points:
    93
    Gender:
    Male
    Location:
    Switzerland
    Home Page:
    It's not enough, there should be more coming after, as it loads the SSL84 and then will continue the loading, so let it continue and after 10 minutes du a copy of all text and attach here in a file to a post,

    TS
     
  16. Mama

    Mama Member

    Messages:
    34
    Likes Received:
    3
    Trophy Points:
    8
    Gender:
    Male
    =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2020.03.15 04:02:51 =~=~=~=~=~=~=~=~=~=~=~=
    Code:
    BCM74050011
    012
    K1
    K2
    
    K3
    
    K4
    
    K5
    
    Shmoo Version=3.2
    DDR Freq=0x0000018C
    %00000001%
    RC1=00000001
    WC1=FFFFFFF8
    RC2=00000011
    WC2=00000012
    RC3=00000009
    WC3=FFFFFFF9
    RC4=00000009
    WC4=0000003A
    NWC=00000019
    RC5=00000001
    WC5=00000019
    RC6=00000011
    WC6=00000019
    NRC=00000009
    RW=00000011
    WW=00000042
    G=00000000 R=00000009 W=00000019
    BL=00000000
    RC1=00000000
    RC2=00000010
    
    BL=00000001
    RC1=00000000
    RC2=00000010
    
    BL=00000002
    RC1=00000000
    RC2=00000010
    
    BL=00000003
    RC1=00000004
    RC2=00000012
    
    BL=00000004
    RC1=00000000
    RC2=00000011
    
    BL=00000005
    RC1=00000001
    RC2=00000017
    
    BL=00000006
    RC1=00000000
    RC2=00000014
    
    BL=00000007
    RC1=00000000
    RC2=00000015
    3
    COPY CODE
    COMPARE CODE
    4567
    (c) 2007,2008 Dream Multimedia GmbH. All rights reserved.
    
    Dreambox D M500HD
    
    FIRST STAGE 1.0/400 {BO23456}
    [m
    
    2ND STAGE OK, build #84 (2011-09-01)
    
     
  17. toysoft

    toysoft Well-Known Member Staff Member

    Messages:
    439
    Likes Received:
    541
    Trophy Points:
    93
    Gender:
    Male
    Location:
    Switzerland
    Home Page:
    We need a longer log, you stop it too early.

    TS
     
  18. toysoft

    toysoft Well-Known Member Staff Member

    Messages:
    439
    Likes Received:
    541
    Trophy Points:
    93
    Gender:
    Male
    Location:
    Switzerland
    Home Page:
    Mama likes this.
  19. Mama

    Mama Member

    Messages:
    34
    Likes Received:
    3
    Trophy Points:
    8
    Gender:
    Male
     
  20. Mama

    Mama Member

    Messages:
    34
    Likes Received:
    3
    Trophy Points:
    8
    Gender:
    Male
    =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2020.03.15 09:39:06 =~=~=~=~=~=~=~=~=~=~=~=
    Code:
    BCM74050011
    012
    K1
    K2
    
    K3
    
    K4
    
    K5
    
    Shmoo Version=3.2
    DDR Freq=0x0000018C
    %00000001%
    RC1=00000001
    WC1=FFFFFFFC
    RC2=00000010
    WC2=00000032
    RC3=00000008
    WC3=FFFFFFFC
    RC4=00000008
    WC4=00000037
    NWC=00000019
    RC5=00000001
    WC5=00000019
    RC6=00000010
    WC6=00000019
    NRC=00000008
    RW=00000010
    WW=0000003C
    G=00000000 R=00000008 W=00000019
    BL=00000000
    RC1=00000000
    RC2=00000010
    
    BL=00000001
    RC1=00000000
    RC2=00000011
    
    BL=00000002
    RC1=00000000
    RC2=0000000E
    
    BL=00000003
    RC1=00000004
    RC2=00000012
    
    BL=00000004
    RC1=00000000
    RC2=00000010
    
    BL=00000005
    RC1=00000000
    RC2=00000015
    
    BL=00000006
    RC1=00000000
    RC2=00000013
    
    BL=00000007
    RC1=00000000
    RC2=00000014
    3
    COPY CODE
    COMPARE CODE
    4567
    (c) 2007,2008 Dream Multimedia GmbH. All rights reserved.
    
    Dreambox D M500HD
    
    FIRST STAGE 1.0/400 {BO23456}
    [m
    
    2ND STAGE OK, build #84 (2011-09-01)
    
    .
    0.017  - BCM board setup
    0.018  - fp init
    0.018  - ca init
    0.515  - load config
    dCA: not existent, loading defaults
    0.542  - config loaded.
     * press to enter setup
    lcd: BOOT #84
     - read config file: /boot/secondstage.conf
    detected jffs2 blocksize: 16kb
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ++++++++++UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU
    dreamupd initialized
    Scanning JFFS2 FS:   .  | / - \ | / - \ | / - \ done.
    
    find_inode failed for name=secondstage.conf
    
    load: Failed to find inode
    
     - failed to open /boot/secondstage.conf
     - failed to open /cf/autorun.bat
    USB wait failed.
    waiting for USB failed!
     - failed to open /boot/autoexec_dm500hd.bat
    no valid boot source found. press any key to enter setup.
    lcd: *** STOP ***
    lcd: /flash/bootlogo.elf
    no HDMI device detected
    no HDMI mode available, reverting to 720p
    using 1280x720p (60.00 Hz)
    HDMI
    using colorspace: 0
    create surface 1280 720
    Virtual FB Size: 1280x720
    BCM74050011
    012
    K1
    K2
    
    K3
    
    K4
    
    K5
    
    Shmoo Version=3.2
    DDR Freq=0x0000018C
    %00000001%
    RC1=00000001
    WC1=FFFFFFFC
    RC2=00000010
    WC2=00000037
    RC3=00000008
    WC3=FFFFFFFC
    RC4=00000008
    WC4=00000037
    NWC=00000019
    RC5=00000001
    WC5=00000019
    RC6=0000000F
    WC6=00000019
    NRC=00000008
    RW=0000000F
    WW=0000003C
    G=00000000 R=00000008 W=00000019
    BL=00000000
    RC1=00000000
    RC2=00000010
    
    BL=00000001
    RC1=00000000
    RC2=00000011
    
    BL=00000002
    RC1=00000000
    RC2=0000000E
    
    BL=00000003
    RC1=00000004
    RC2=00000011
    
    BL=00000004
    RC1=00000000
    RC2=00000010
    
    BL=00000005
    RC1=00000000
    RC2=00000015
    
    BL=00000006
    RC1=00000000
    RC2=00000012
    
    BL=00000007
    RC1=00000000
    RC2=00000014
    3
    COPY CODE
    BCM74050011
    012
    K1
    K2
    
    K3
    
    K4
    
    K5
    
    Shmoo Version=3.2
    DDR Freq=0x0000018C
    %00000001%
    RC1=00000001
    WC1=FFFFFFFC
    RC2=00000010
    WC2=00000037
    RC3=00000008
    WC3=FFFFFFFC
    RC4=00000008
    WC4=00000037
    NWC=00000019
    RC5=00000001
    WC5=00000019
    RC6=0000000F
    WC6=00000019
    NRC=00000008
    RW=0000000F
    WW=0000003C
    G=00000000 R=00000008 W=00000019
    BL=00000000
    RC1=00000000
    RC2=00000010
    
    BL=00000001
    RC1=00000000
    RC2=00000010
    
    BL=00000002
    RC1=00000000
    RC2=0000000E
    
    BL=00000003
    RC1=00000004
    RC2=00000012
    
    BL=00000004
    RC1=00000000
    RC2=00000010
    
    BL=00000005
    RC1=00000000
    RC2=00000015
    
    BL=00000006
    RC1=00000000
    RC2=00000012
    
    BL=00000007
    RC1=00000000
    RC2=00000014
    3
    COPY CODE
    COMPARE CODE
    4567
    (c) 2007,2008 Dream Multimedia GmbH. All rights reserved.
    
    Dreambox D M500HD
    
    FIRST STAGE 1.0/400 {BO23456}
    [m
    
    2ND STAGE OK, build #84 (2011-09-01)
    
    .
    0.017  - BCM board setup
    0.018  - fp init
    0.018  - ca init
    0.515  - load config
    dCA: not existent, loading defaults
    0.541  - config loaded.
     * press to enter setup
    lcd: BOOT #84
     - read config file: /boot/secondstage.conf
    detected jffs2 blocksize: 16kb
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ++++++++++UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU
    dreamupd initialized
    Scanning JFFS2 FS:   .  | / - \ | / - \ | / - \ done.
    
    find_inode failed for name=secondstage.conf
    
    load: Failed to find inode
    
     - failed to open /boot/secondstage.conf
     - failed to open /cf/autorun.bat
    BCM74050011
    012
    K1
    K2
    
    K3
    
    K4
    
    K5
    
    Shmoo Version=3.2
    DDR Freq=0x0000018C
    %00000001%
    RC1=00000001
    WC1=FFFFFFFC
    RC2=00000010
    WC2=00000037
    RC3=00000008
    WC3=FFFFFFFC
    RC4=00000008
    WC4=00000037
    NWC=00000019
    RC5=00000001
    WC5=00000019
    RC6=00000010
    WC6=00000019
    NRC=00000008
    RW=00000010
    WW=0000003C
    G=00000000 R=00000008 W=00000019
    BL=00000000
    RC1=00000000
    RC2=00000010
    
    BL=00000001
    RC1=00000000
    RC2=00000010
    
    BL=00000002
    RC1=00000000
    RC2=0000000F
    
    BL=00000003
    RC1=00000004
    RC2=00000011
    
    BL=00000004
    RC1=00000000
    RC2=00000010
    
    BL=00000005
    RC1=00000000
    RC2=00000015
    
    BL=00000006
    RC1=00000000
    RC2=00000013
    
    BL=00000007
    RC1=00000000
    RC2=00000014
    3
    COPY CODE
    COMPARE CODE
    4567
    (c) 2007,2008 Dream Multimedia GmbH. All rights reserved.
    
    Dreambox D M500HD
    
    FIRST STAGE 1.0/400 {BO23456}
    [m
    
    2ND STAGE OK, build #84 (2011-09-01)
    
    .
    0.017  - BCM board setup
    0.018  - fp init
    0.018  - ca init
    0.513  - load config
    dCA: not existent, loading defaults
    0.540  - config loaded.
     * press to enter setup
    lcd: BOOT #84
     - read config file: /boot/secondstage.conf
    detected jffs2 blocksize: 16kb
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ++++++++++UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU
    dreamupd initialized
    Scanning JFFS2 FS:   .  | / - \ | / - \ | / - \ done.
    
    find_inode failed for name=secondstage.conf
    
    load: Failed to find inode
    
     - failed to open /boot/secondstage.conf
     - failed to open /cf/autorun.bat
    
     
    Last edited: Mar 15, 2020