Hi Johnny ! i was told me that you are the best i ask you for help. i think that the flash memory is almost dad, i try a lot of things, but the results are bad. i try this flash-rescue /tmp/*.bin got this Fatal: Cannot access '/tmp/*.bin' i also try fdisk -lu /dev/mmcblk0 and got fdisk: can't open '/dev/mmcblk0': Input/output error Fatal: Failed to partition disk Fatal: Failed to execute './recovery' can you please confirm/check my suspects? thank you in advanced
Based on the information you've provided, it seems to me that it could indeed be caused by a faulty nand flash chip.... But, suppose there is a bad solder from/to the nand chip, or a bad connection, then it can also give this problem. So I think that it's better to check/inspect the I/O pins and dc voltage pins of the chip before thinking of replace it. That is, if it is a pin chip, one with solder balls will be difficult to measure.
