DreamTV Mini Ultra HD pcb pictures.

Discussion in 'DreamTV Mini UltraHD IPTV' started by Johnny B., May 24, 2020.

  1. Johnny B.

    Johnny B. Technical Support Staff Member Moderator

    Messages:
    2,459
    Likes Received:
    1,235
    Trophy Points:
    113
    Gender:
    Male
    Location:
    Netherlands
    Home Page:
    I've made some inside pictures of the DreamTv which could be handy when you may needed.

    Just a picture of what to expect in the box,
    but I forgot to add the HDMI cable when I took the picture, but that's included.
    DreamTV_Mini.jpg

    To open it,
    you have to remove two screws on the bottom
    and the trick is that one of them is hidden under the sticker,
    so you have to remove it a bit to get to the screw.
    DreamTV_Mini-inside.jpg


    Fairly large picture of the motherboard of the parts side in reasonable quality.
    It is small, but looks interesting, click on the picture if you want to see it in full size.
    DreamTV_Mini-pcb-partsside.jpg
    Unfortunately for the Dc to Dc conversion, the S3CN3 sot23-6 ic's have been used,
    of which (at the moment) there is not yet a datasheet.
    For now, I only see that pin 1 is VIN, pin 5 is Gnd and pin 6 is VOUT, but maybe later more about this.

    And at last, a picture of the Print side...
    DreamTV_Mini-pcb-printside.jpg
    Interesting to see (at least, I find that) are the notes of Linux Rx / Tx connections on the left and the text USB_update on the right below.

    Anyways later more info about this board, as datasheets etc.
     
    toysoft, adas and raza05 like this.
  2. raza05

    raza05 Active Member

    Messages:
    122
    Likes Received:
    195
    Trophy Points:
    43
    Gender:
    Male
    Nice
     
    Johnny B. likes this.