DM800HDse Clone from Sunray No Ca Found Hardware Fault

Discussion in 'Hardware troubles and Repair support.' started by tiku, Dec 6, 2024.

  1. tiku

    tiku New Member

    Messages:
    13
    Likes Received:
    0
    Trophy Points:
    1
    Gender:
    Male
    Hello Sir, I have three DM8OOHDse, one from another clone company and two from Sunray, two are stuck on No Ca Found, & One from Sunray shows nothing on the panel display But Green led on tuner and Five Red Led are OK.

    I tried all the Tools Available on Net To Recover From No Ca Found, Sunray FlashUP,Jaspher Flasher,
    DreamBox Opti Flasher, DreamUp, but could not get an IP From the box, in two boxes if i plug in the mini usb service port, and click connect in the Sunray Flasher, it says connection establish, but the box Name doesn't show in the left below, and in one Box it shows dm800 connected, The Green Bar goes full and then it says waiting for the acknowledgement and no progress futher.

    Note:- Actually I had Four Boxes with No Ca Found option, and one I have successfully Flashed, So there is No Chance of Damaged RJ45 & Usb Cable, Or Router Problem.
    I have checked all three boxes P1100 pins Ohms with one working DM800hdse, and its value is same.

    I think its a hardware fault, if i can get one or two repaired from out out of three boxes that would be great.
    Thanks
     
    Last edited: Dec 6, 2024
  2. Johnny B.

    Johnny B. Technical Support Staff Member Moderator

    Messages:
    2,995
    Likes Received:
    1,584
    Trophy Points:
    113
    Gender:
    Male
    Location:
    Netherlands
    Home Page:
    No Ca Found is generally due to a defective sim (or SSL not compatible with your sim). If you are sure you flashed the right SSL for your sim, then it can be hardware issue.
    See here for some more about it and also for the sunray boot loader ssl file.

    One tip, I advice always to flash these older dreamboxes with windows Xp.