Cloud-Ibox4 with VuJ chip testing

Discussion in 'Cloud-Ibox4 receiver' started by Johnny B., Feb 6, 2018.

  1. Johnny B.

    Johnny B. Technical Support Staff Member Moderator

    Messages:
    2,822
    Likes Received:
    1,504
    Trophy Points:
    113
    Gender:
    Male
    Location:
    Netherlands
    Home Page:
    I've bought a defective cloud-ibox4 which has the famous red led issue and it was simply to repair by replacing the nand flash chip, but later more about this.
    In any case now it works I had the opportunity to see if I could modify it to work with the VuJ chip, and thus removed the old security chip from the print side, added two wires on the Scl/Sda circuits and build a socket for it to easily plugin the VuJ board.

    Later I will make a good instructions drawing for it, but for now I can tell that this box perfectly works on the VuJ chip.
    Uploaded the openpli original duo file, did some online upgrades, tested the card readers etc, and it still works fine.
    In any case, I have here some pictures from it, have fun..

    Click on one of the pictures for a full view (if you like).
    Cloud-Ibox4-VuJchiptesting-openpli.JPG

    Cloud-Ibox4-VuJchiptesting.JPG
     
    toysoft and samiherz like this.