Cloud-Ibox VuJ chip modification.

Discussion in 'Securitychip to VuJ Chip modification information.' started by Johnny B., Aug 12, 2018.

  1. Johnny B.

    Johnny B. Technical Support Staff Member Moderator

    Messages:
    2,822
    Likes Received:
    1,504
    Trophy Points:
    113
    Gender:
    Male
    Location:
    Netherlands
    Home Page:
    It's a opportunity to modify your (old) Cloud-Ibox version 1 into a original Vu+ Solo Ibox so that you can use the latest original Vu+ Solo image files.

    It is not the most expensive box, nor the latest, but it is the Cloud-Ibox version 1 modification for using the VuJ chip module on this box.

    You can ask yourself why, because it is an old receiver and too old to spend some extra money on it.
    Well, actually you are correct, but if this box still works without problems, and you still want to use the latest software and no longer use that old clone software.

    Then you can consider changing this box with the VuJ chip module, because only then are you able to use the latest and even the original software.

    Anyway, to give you the opportunity to give your old box a new engine, I have found a way for it.
    It has been tested without problems with the latest Vu+ Solo OpenAtv and OpenPli.

    Experience the new possibilities, or leave it as it is, I just want to give you the chance to upgrade it if you want.

    Cloud_Ibox_VuSolo_VuJ-Securitychip-mod.jpg
     
    raza05 and toysoft like this.
  2. bgab39

    bgab39 New Member

    Messages:
    6
    Likes Received:
    1
    Trophy Points:
    3
    Gender:
    Male
    Hi Johnny! Can this be done on a cloud-ibox II plus ?
     
  3. Johnny B.

    Johnny B. Technical Support Staff Member Moderator

    Messages:
    2,822
    Likes Received:
    1,504
    Trophy Points:
    113
    Gender:
    Male
    Location:
    Netherlands
    Home Page:
    No sorry, since this box is not Vu+ image files related it will most likely not work.
     
    raza05 likes this.
  4. bgab39

    bgab39 New Member

    Messages:
    6
    Likes Received:
    1
    Trophy Points:
    3
    Gender:
    Male
    I run black Hole 2.1.7, thought that it is VU+ image?
     
  5. Johnny B.

    Johnny B. Technical Support Staff Member Moderator

    Messages:
    2,822
    Likes Received:
    1,504
    Trophy Points:
    113
    Gender:
    Male
    Location:
    Netherlands
    Home Page:
    That's possible, but these cloud-ibox II plus uses his own software with his own map structure.
    It does, or can not install original Vu+ image files.

    As for the security chip replacement, technical it can be replaced for the VuJ chip, but the box will most likely not starting up due the difference of the data of the security chips.
     
  6. bgab39

    bgab39 New Member

    Messages:
    6
    Likes Received:
    1
    Trophy Points:
    3
    Gender:
    Male
    Ok,thank you for the info on it. It is sad that there is nothing to do about it since i have 4 of them laying around here.
    Have a good evening and thank you so much for all the help and suport you do.
     
    Johnny B. likes this.
  7. fisher33

    fisher33 New Member

    Messages:
    6
    Likes Received:
    4
    Trophy Points:
    3
    Gender:
    Male
    i have an open box S6000 HD wich is the predecesor of the cloud ibox, so can i or should i do the board modification as well? if so, where can buy it and how can i install it? TIA
     
  8. Johnny B.

    Johnny B. Technical Support Staff Member Moderator

    Messages:
    2,822
    Likes Received:
    1,504
    Trophy Points:
    113
    Gender:
    Male
    Location:
    Netherlands
    Home Page:
    The VuJ chip is only tested on Vu+ related boxes which runs on the Vu+ software.
    Other boxes which has a security chip, but running on his own (non Vu+ suitable) written software are not tested with this chip.
    I'm not claiming that it not works, but since it is not tested there is no guarantee that it will work, and I think, it's very doubtfully that it will.
     
    raza05 and fisher33 like this.
  9. fisher33

    fisher33 New Member

    Messages:
    6
    Likes Received:
    4
    Trophy Points:
    3
    Gender:
    Male
    my box is vu+ solo software.
     

    Attached Files:

    toysoft likes this.
  10. toysoft

    toysoft Well-Known Member Staff Member

    Messages:
    443
    Likes Received:
    551
    Trophy Points:
    93
    Gender:
    Male
    Location:
    Switzerland
    Home Page:
    It seems to me a VU+ Solo box, there is BlackHole on it... no other box than the VU+ had it.

    See :

    TS
     
    raza05 likes this.
  11. toysoft

    toysoft Well-Known Member Staff Member

    Messages:
    443
    Likes Received:
    551
    Trophy Points:
    93
    Gender:
    Male
    Location:
    Switzerland
    Home Page:
    Open the box and do a Photo of both sides of the motherboard, I am pretty sure Johnny will find out exactly what is needed to be understood with his experience with other Cloud ibox,

    TS

     
    raza05 and Johnny B. like this.
  12. fisher33

    fisher33 New Member

    Messages:
    6
    Likes Received:
    4
    Trophy Points:
    3
    Gender:
    Male
    let me know if you need more of an specific angle mate...
     

    Attached Files:

    Johnny B. likes this.
  13. toysoft

    toysoft Well-Known Member Staff Member

    Messages:
    443
    Likes Received:
    551
    Trophy Points:
    93
    Gender:
    Male
    Location:
    Switzerland
    Home Page:
    Looks like same box as the Cloud ibox, security chip photo below (from your photos),

    TS

     

    Attached Files:

    raza05, Johnny B. and fisher33 like this.
  14. fisher33

    fisher33 New Member

    Messages:
    6
    Likes Received:
    4
    Trophy Points:
    3
    Gender:
    Male
    yes, the open box s6000 hd was first and later they turned it into cloud ibox. but specs and looks are identical.
     
    toysoft likes this.
  15. Johnny B.

    Johnny B. Technical Support Staff Member Moderator

    Messages:
    2,822
    Likes Received:
    1,504
    Trophy Points:
    113
    Gender:
    Male
    Location:
    Netherlands
    Home Page:
    Yes indeed, by seeing the photo's, it looks to me that it will work with the VuJ chip, also the wiring seems to be similar.
     
    raza05, fisher33 and toysoft like this.
  16. toysoft

    toysoft Well-Known Member Staff Member

    Messages:
    443
    Likes Received:
    551
    Trophy Points:
    93
    Gender:
    Male
    Location:
    Switzerland
    Home Page:
    raza05 and Johnny B. like this.
  17. Svyatoslav

    Svyatoslav New Member

    Messages:
    2
    Likes Received:
    2
    Trophy Points:
    3
    Gender:
    Male
    Hello dear forum users, I have such a box (Open box s6000 hd) and the secret chip marking is not destroyed on my board, it has the inscription STM8S105K4T6C.
     
    toysoft and Johnny B. like this.
  18. Johnny B.

    Johnny B. Technical Support Staff Member Moderator

    Messages:
    2,822
    Likes Received:
    1,504
    Trophy Points:
    113
    Gender:
    Male
    Location:
    Netherlands
    Home Page:
    Thanks for your information which basically confirms that the pin-out is the same as on the ibox drawing.
    Thus as expected, there should be no issues to use the VuJ chip on these receivers.
    However, since it is not tested with these (Openbox s6000HD) receivers, there is always a (little) risk that it may not works.
     
    toysoft and Svyatoslav like this.
  19. toysoft

    toysoft Well-Known Member Staff Member

    Messages:
    443
    Likes Received:
    551
    Trophy Points:
    93
    Gender:
    Male
    Location:
    Switzerland
    Home Page:
    The VU J Chip is 12 x 4 = 48 pins, your chip is 8 x 4 = 32 pins, so it's not possible to replace the chip, you will have to disconnect it and install the VU J board,

    TS
     
    Svyatoslav likes this.
  20. fisher33

    fisher33 New Member

    Messages:
    6
    Likes Received:
    4
    Trophy Points:
    3
    Gender:
    Male
    is that an easy task to do?cause i´m thinking of getting one.

    can this box be capable to work with powervu (oscam) to these days?