Yes. Johny can repair. Until then you can try update your rescue bootloader.
Search , download and install - change-mac-address_e2_all.ipk Or use this tutorial -...
I apologize, but time does not allow me to enter here too often.
Why ?
It's easy to repair; try to search - 2nd_stage_pack.rar (thanks Ferret and thomaz from sat-universe ) 1. Connect you null cable to the 800 with...
Especially for Johnny B and Toysoft - Merry Christmas and lots of happiness with your loved ones!
Hello Johny - Happy New Year!
Hello, You cant try this - https://jb8a8f8.com/support/index.php?threads/dm900uhd-motherboard-pictures.204/page-4#post-2656 Or use opendhcp on pc...
And how remove the original skin? It's hard? Thanks for sharing.
Good point. And how did you fit the radiator on the motherboard?
USB 2.0 Cable - A-Male to Mini-B - https://www.amazon.com/AmazonBasics-USB-2-0-Cable-Male/dp/B00NH11N5A
On first page (#7) i put real pictures; triple tunner Si2169C.
The pictures was made today - dm900 sim 2.30
My receiver was brick, because I installed original merlin image and not replaced drivers from /lib. I forgot and i restarted receiver. Only mode...
@toysoft - take a look at pictures I have original bootloader from dreamboxupdate - zImage-rescue-3.14-r0-dm900-20170801.bin I think there was...
Only if your receiver dont go in recovery mode For rescue DM900 use usb cable and putty (serial port). Start receiver and push ctrl+C to enter...
I use all methods; with finger and from putty - to-the-rescue and echo "rescue" >> /proc/stb/fp/boot_mode && reboot Receiver not in recovery...
All cable is good. I changed of course.
With wrt54gl (100mb) the same situation. Network card not start quick. ........ IT: Entering runlevel: 3 Configuring network interfaces... [...
But until now always used this router. Suddenly not get Ip. I'll try with old linksys