On one of the Boxes i Looked with my Chinese Digital Microskope and found out That something is missing under the Broadcom Looking to Fix that...
Looks like i must Modify ma Dreams all Series 900 and 920 have same problem Between the Haetsink and Broadcom there are about 4-5 mm Air so...
Yes the older ones like 820 HD with the Cooler are live longer then the new ones like 900 and 920 without Cooler on the Top of the Box It is an...
If i made a Heatsink that is going across the whole Broadcom Processor and make Pressure on the whole BGA that would help a little bit When i am...
i have here 2 DM 900 UHD Boxes with same Problem if i do a littel Bit Pressure on the BCM Chip they are Booting without a Pressure i get...
Update Changed the Cable and now the Box works fine without Problems without any Problems so EMMC1: transfer complete intr error,...
doesent get the new Cable till now but i still investigate on the Box with shortening the Cable doesent hold Long time that it is working so i...
After i had a Box that run on evry Booting in Rescue Mode i Started to Investigate i Get an Error with Connected Frontpanel...
Thx Annyway Johnny all info is welcome to learn something and to forward my knowledge some Peepz manage to Dump that Boxes and for learning any...
The Box is a Kaon Ns1000 and the new one is Kaon NS1040 i Use Cypress Board with SCL SDA and GND Port i have here another one that i can Try too...
In some Images they haved a Failure for the DNS Adress i haved this Issue on my 820 HD too what happen if u use an Other Image is the Failure...
Thank you Johnny for your Reply i think i forwarded little bit but there is now a Message : Master SPI timed out waiting for Response what is...
Thx Johnny for your Answer i dont have a Nand Flash Programmer so would not be possible to Repair a Bricked Box without having the Right Flash or...
Greetings to all Forum Members Its my First Post and i Hope if i made something Wrong that you Point me in Right Direction i Would like to Know...