All that you said I did, even on the browser screen, the bad sector was removed and I hit the reboot option but the receiver didn't come off, I...
I changed to 192.168.1.10 Because dhcp mode is enabled each time it receives a different IP, it was previously 192.168.1.14.
I reset the BIOS but...
When I plug in the network cable, the receiver does not receive the IP and I have to manually do the IP But when I turn on the power button on the...
I tested Dreamup and JarphrFLlasher and it didn't work And like in the picture below it stays on chcksum.
Unfortunately, I don't have the...
I also tested this image.
This is software for Sim 2. My box is original
Probably fixing the device with a dreamup or japharflasher and best of all optiflasher.
Do you have a registry code for optiflasher? On their site...
The master turns the box on and off every ten to twenty times, alternately turning on or off the power key.
Or with the chance to turn the power...
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2020.03.15 09:39:06 =~=~=~=~=~=~=~=~=~=~=~=
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2020.03.15 04:02:51 =~=~=~=~=~=~=~=~=~=~=~=
After flashing, the receiver will remain on the red light and will not boot
The SIM card is flawless. I can easily flash with the web browser but with dremup or japharflasher staye on the checksum mode.
The lan port was created but it will not accept images with dreamup or Japharflasher, only accept IP images.I hit the image too, but until I turn...
Please send me the free version of optiflasher
Stays in checksum mode. I test it any way it stays.
I checked the SIM card was original. I turned on the Netcraft option on the japharflasher but the flashing lights on the back of the box with the...
I'm sure it's a genuine SIM card. I opened the box and checked.
When I turn on the lan cable to the receiver and turn on the receiver, the...