Dear sir please check
L39 3.3v both side 4R1
L38 5.1 v both side 5R3
D25 negative side 10.10v positive side 16.95v
After placing a new a2p sim motherboard not alive voltage measurement J11 and j14 only 3 LED D6 D7 glowing after connecting LAN port wire D5 is...
Yes i have smartcard reader
Smartmouse Phoenix smartCard what i can do
Dear admin & all dm expert my dm500+
Motherbord (sim A2P) i don't know about rs232 connection this 10 pin connector please tell me anyone what is...
Lnb out voltage is 3.3 volt tuner empty show
What I can do
Thanks sir dm live now 200n03s same as 300n3s it's n channel mosfet
Finally I found the problem tuner IC 200n03 is damage how can replace is 300n3s
Dear admin my dear at 500 HD version 2 is dead 12 volt supply in but he is the voltage dropped to 2 volt I will checked all diode is the [ATTACH]...
Thankx johnny sir and toysoft for this information
I think this is the sim problem because there are some other dreambox not working
How can possible to use dm500hd sim in DM 800 se
Dear admin my dm800Se sima8p showing this error waiting for acknowledge... nothing instal image any tool please help me thankx[ATTACH] [ATTACH]...
thanks sir for reply
LNBP21PD voltage measurements are
pin ..... volt
without tuner all voltage measurement is ok showing as this fig but with tuner some point 21,52,53,56 different
53 point ov
dear sir please help i have dm800hd its tuner no searching signal what is problem
CLK OUT PIN 2.0 MV OUT OF 1.72
LNB RF POWER...