The dm800hd uses the.. smd diode red 0805 So it's most likely in this case a smd diode blue 0805
Only missing the 3.3v is a bit odd because than you may expect that the 1.2v also should missing, Maybe the inductor coil 3R3, L1112, check before...
You can find the LNBH21PD chip on the print side.. [IMG] But be sure that the pcb to the motherboard connector is clean before thinking to...
No sorry, because I don't have these Vu+ uno 4k se receiver.
Based on, MEMSYS:0000002f Than i seems to me a memory issue, maybe the second stage part has some errors, or the memory itself, or other cases as...
Then it looks like I can't help you further. Using windows XP, with a real DB9 serial port, and the software available should be sufficient for a...
You can download it here.. And I've added some more information about the Jtag as some extra pictures.
Yes indeed, it does not see a nand flash chip. As if none are installed. Quite strange if you have checked all the main nand chip pins. Because...
I've did some testings to see when the nand chip may fail and it's not due the security chip because without it it just can reach the nand chip....
You could wait till Saturday, if all goes to plan than i'm to my workshop and could do some testings. By reading back when you had play with the...
Meg ohms/ohms.. it does not matter, main thing is that the i/o pins are in the same range. Then you know that all the data lines are connected...
If they're all eight in the same ohm range then there's really no reason why it's acting that way. Or there must be something wrong with the RE/WE...
I normally check the eight i/o pins with ohm measurements between the ground and the i/o pins to see if there are some issues. They must be in the...
Yeah,I noticed that by reading it back. Well, that sucks, because there are no other options than I already had given. Basic rules are, use the...
In that case it may happen that the nand chip has become corrupted, and need to be replaced. But what could work is to do several times the erase...
The picture shows that you use the k9f1g08u0d.xml script while your nand chip is the k9f2g08u0c. Thus in this case it's logic that it won't work.
You can just use the same parts as this drawing shows from the Dm800se-U1104-1103. As for the inductor,you can use the same 2R2 smd coil if it is...
That depends if you want to use things like iptv/youtube etc then you are better off with a latest openpli image file. If you only use the...
Based on your message that you posted on the japhar forum it seems to me that you solved this problem with software and so it appears to have not...
Answer to.. Dcc I load the settings and send them to the decoder! restart the decoder, green the screen or turns blue... I assume you send the...
