I have a problem with solo 4k. I can not update from the usb port. It looks like the files are protected from writing. I wanted to give all chmod 777 files, but unfortunately it does not give anything. Telnet and ssh is active.
What if you add/enable the empty file named force.update into the usb file. Just take a text editor and save is as force.update, not force.update.txt
I've tried to upload image with this file. Unfortunately, it's the same. Some files are not overwritten. I can't delete files from the flash because chmod does not allow. I also tried to upload the original image of the VU. Unfortunately, the same. Vuutil does not heal this tuner. Only shows that he is entering CFE. I wonder what it means: Code: [ 303.834350] EXT4-fs (mmcblk0p4): error count since last fsck: 230 [ 303.840466] EXT4-fs (mmcblk0p4): initial error at time 1492624746: ext4_iget:4251: inode 220419 [ 303.849208] EXT4-fs (mmcblk0p4): last error at time 7: ext4_put_super:789: inode 220419 I tried to do e2fsck, but it shows that the media is mounted and I can not do fsck.
ok, I launched e2fsck Code: Warning: skipping journal recovery because doing a read-only filesystem check. /dev/mmcblk0p4 contains a file system with errors, check forced. Pass 1: Checking inodes, blocks, and sizes Deleted inode 156176 has zero dtime. Fix? no Inode 220419, i_blocks is 216, should be 0. Fix? no Pass 2: Checking directory structure Inode 220419 (/etc/enigma2/skin_user_BlackHarmony.xml) has invalid mode (037644). Clear? no Entry 'skin_user_BlackHarmony.xml' in /etc/enigma2 (220368) has an incorrect filetype (was 1, should be 0). Fix? no Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information Block bitmap differences: -(27808--27818) -(539109--539112) -(595648--595919) -(623831--623842) -(885914--885929) Fix? no Inode bitmap differences: -156176 Fix? no /dev/mmcblk0p4: ********** WARNING: Filesystem still has errors **********
Sorry but although I own this box, I have no experiences with this kind of issues. Normally there is often something to find on the internet, but since this box is not old there is less to find. But I wonder what this means.. Board ID is zero! - You need to hardware fix (ECO) it!
HI, any idea for fix this crash boot ? BOOT Code: CPU 01 BCM73660020 PRID73760020 v9.99 RR:00000003 BFW seclib-1.5 BBL v1.0.1 AVS init... spare0/rmon_hz=017d736f spare1/rmon_vt=017d736f AVS init OK AVS load:select_image: addr_offset: 00051000 part_offset: 00000000 bootStatus: 2a002b00 AVS load_code offset =00051000 LOADED I2C @ f040a280. BID: no ack! single board MEMSYS-STD SHMOO 01010107 BLD:9286 HW:hpf0_b1p4 V:1.1.1.7 MCB: FLEX AVS start:status=000000ff STB: Current voltage=00000371(881) temperature=0000c1fc(49660) PV=0000034f(847) MV=00000371(881) AVS FW rev=30333078 [0.3.0.x] OK DDR0: !@ ffe0e780 <= ffe0dfc4 MEMSYS-0 @ f0500000 OK DDR1: =@ ffe0e780 <= ffe0dfc4 MEMSYS-1 @ f0900000 OK Sdram Scramble OTP = 0x00000001 Sdram Scramble OK select_image: addr_offset: 00020000 part_offset: 00000000 bootStatus: 1b05252b BFW load mode OTP = 0x0000000f bfw_hash_locked = 0x00000000 BFW key3 OK, BFW load OK BFW v2.1.0 COPY CODE... DONE MICH: disable success SSBL PINMUX CACHE FLUSH OK MMU ON CACHE FLUSH OK _fbss 07077170 _ebss 0708ebd8 _end 0708ebf8 HEAP @ 07100000 STACK @ 09200000 ARCH: CONFIG OK CLR BSS 07077170 to 0708ebd8 OK CLR SRAM OK MARK XN: 07100000 to 09200000 size 02100000 OK CACHE FLUSH OK CPU CLKSET OK GO! ,/ ,'/___, BOLT v9.99 1b4a6a4 LOCAL BUILD .'__ ,' (2015-09-02 15:24:48 vuplus-team@vuplus-team-Notebook) /,' Copyright (C) 2015 Broadcom Corporation /' Board: BCM97366SFF_bad_MoCA SYS_CTRL: product=7376, family=7366c0, strap=000001ad, otp @ 0xf0404030 = 0x826000e0: en_cr(0x00000060) en_testport(0x00000080) hdmi_rx_disable(0x00400000) macrovision_disable(0x02000000) moca_disable(0x80000000) rv9_disable(0x00200000) otp @ 0xf0404034 = 0x60081821: audio_0_disable(0x00000800) audio_1_disable(0x00001000) directv_disable(0x20000000) hdmi_tx1_disable(0x00000001) moca2_disable(0x40000000) rfm_disable(0x00000020) tfec_disable(0x00080000) otp @ 0xf0404520 = 0x00000000: CPU: 2x A15, 1503 MHz SCB: 324 MHz DDR0 @ 1067MHz, DDR1 @ 1067MHz RESET CAUSE: 0x000003 main_chip_input power_on (2 of 22 possible causes) CS0: SFDP SPI, 4MB, 64kB blocks, 256B pages CS1: NAND: unrecognized ID: 0x1ffffff 0xffffffff RTS0: 0x501004, 256 clients, ok RTS1: 0x901004, 256 clients, ok rts 03 [20141112213819_4ku0t_box3]*default BOX MODE: 3 LCD_Init Complete AVS: park check AVS: temperature monitoring enabled AVS: STB: V=0.877V, T=+50.634C, PV=0.847V, MV=0.881V, FW=30333078 [0.3.0.x] USB @ 0xf0480200: IPP is active high, IOC is negative polarity USB @ 0xf0490200: IPP is active high, IOC is negative polarity SPLASH: starting SPLASH BMEM init @ 40000000 SPLASH BMEM init @ c0000000 usb: resetting device on bus 1 hub 1 port 1 USB: New high speed device connected to bus 1 hub 1 port 1 usb: found Human-Interface Device 1004:6300 usb: resetting device on bus 4 hub 1 port 1 USB: New high speed device connected to bus 4 hub 1 port 1 usb: no driver found for 148f:5372 SPLASH: Old format file in flash. Use splash_create_flash_file to create newer format. Loaded BMP: W=720 H=480 SPLASH: audio not present boot device name [flash0.bolt] waiting for usb...done checking usb No Priority Usb checking front key readFrontKey 0 0 Check ignore.update file Checking usbdisk0:/vuplus/solo4k/ignore.update......NO Check force.update file Checking usbdisk0:/vuplus/solo4k/force.update......NO bolt update ...Checking usbdisk0:/vuplus/solo4k/bolt_auto.bin......NO Checking usbdisk0:/vuplus/solo4k/rootfs.tar.bz2......NO ....NO Checking usbdisk0:/vuplus/solo4k/splash_auto.bin......NO Checking usbdisk0:/vuplus/solo4k/kernel_auto.bin......NO Board ID is zero! - You need to hardware fix (ECO) it! Executing STARTUP... Loader:raw Filesys:fat Dev:(null) File:emmcflash0.startup:STARTUP Options:(null) Loading: CPU exception: ABT r0 : 00000000 r1 : 00000000 r2 : 00000000 r3 : 00000000 r4 : 00000000 r5 : 00000000 r6 : ffffffff r7 : 0776c40c r8 : 0776c860 r9 : 00000000 r10 : 0708b2c4 r11 : dffffffb r12 : 00000000 r13 (sp): 091ff950 r14 (lr): 07016810 r15 (pc): 07016808 cpsr : 600001d3 dfsr : 00000007 dfar : 00000000 ifar : 00000000 CTRL-C Code: CPU 01 BCM73660020 PRID73760020 v9.99 RR:00000003 BFW seclib-1.5 BBL v1.0.1 AVS init... spare0/rmon_hz=017d736f spare1/rmon_vt=017d736f AVS init OK AVS load:select_image: addr_offset: 00051000 part_offset: 00000000 bootStatus: 2a002b00 AVS load_code offset =00051000 LOADED I2C @ f040a280. BID: no ack! single board MEMSYS-STD SHMOO 01010107 BLD:9286 HW:hpf0_b1p4 V:1.1.1.7 MCB: FLEX AVS start:status=000000ff STB: Current voltage=00000371(881) temperature=0000bc47(48199) PV=00000350(848) MV=00000371(881) AVS FW rev=30333078 [0.3.0.x] OK DDR0: !@ ffe0e780 <= ffe0dfc4 MEMSYS-0 @ f0500000 OK DDR1: =@ ffe0e780 <= ffe0dfc4 MEMSYS-1 @ f0900000 OK Sdram Scramble OTP = 0x00000001 Sdram Scramble OK select_image: addr_offset: 00020000 part_offset: 00000000 bootStatus: 1b05252b BFW load mode OTP = 0x0000000f bfw_hash_locked = 0x00000000 BFW key3 OK, BFW load OK BFW v2.1.0 COPY CODE... DONE MICH: disable success SSBL PINMUX CACHE FLUSH OK MMU ON CACHE FLUSH OK _fbss 07077170 _ebss 0708ebd8 _end 0708ebf8 HEAP @ 07100000 STACK @ 09200000 ARCH: CONFIG OK CLR BSS 07077170 to 0708ebd8 OK CLR SRAM OK MARK XN: 07100000 to 09200000 size 02100000 OK CACHE FLUSH OK CPU CLKSET OK GO! ,/ ,'/___, BOLT v9.99 1b4a6a4 LOCAL BUILD .'__ ,' (2015-09-02 15:24:48 vuplus-team@vuplus-team-Notebook) /,' Copyright (C) 2015 Broadcom Corporation /' Board: BCM97366SFF_bad_MoCA SYS_CTRL: product=7376, family=7366c0, strap=000001ad, otp @ 0xf0404030 = 0x826000e0: en_cr(0x00000060) en_testport(0x00000080) hdmi_rx_disable(0x00400000) macrovision_disable(0x02000000) moca_disable(0x80000000) rv9_disable(0x00200000) otp @ 0xf0404034 = 0x60081821: audio_0_disable(0x00000800) audio_1_disable(0x00001000) directv_disable(0x20000000) hdmi_tx1_disable(0x00000001) moca2_disable(0x40000000) rfm_disable(0x00000020) tfec_disable(0x00080000) otp @ 0xf0404520 = 0x00000000: CPU: 2x A15, 1503 MHz SCB: 324 MHz DDR0 @ 1067MHz, DDR1 @ 1067MHz RESET CAUSE: 0x000003 main_chip_input power_on (2 of 22 possible causes) ****************************************** Automatic startup canceled via Ctrl-C ****************************************** CS0: SFDP SPI, 4MB, 64kB blocks, 256B pages CS1: NAND: unrecognized ID: 0xffffff 0xffffffff RTS0: 0x501004, 256 clients, ok RTS1: 0x901004, 256 clients, ok rts 03 [20141112213819_4ku0t_box3]*default BOX MODE: 3 LCD_Init Complete AVS: park check AVS: temperature monitoring enabled AVS: STB: V=0.879V, T=+49.173C, PV=0.848V, MV=0.881V, FW=30333078 [0.3.0.x] USB @ 0xf0480200: IPP is active high, IOC is negative polarity USB @ 0xf0490200: IPP is active high, IOC is negative polarity SPLASH: starting SPLASH BMEM init @ 40000000 SPLASH BMEM init @ c0000000 usb: resetting device on bus 1 hub 1 port 1 USB: New high speed device connected to bus 1 hub 1 port 1 usb: found Human-Interface Device 1004:6300 usb: resetting device on bus 4 hub 1 port 1 USB: New high speed device connected to bus 4 hub 1 port 1 usb: no driver found for 148f:5372 SPLASH: Old format file in flash. Use splash_create_flash_file to create newer format. Loaded BMP: W=720 H=480 SPLASH: audio not present boot device name [flash0.bolt] waiting for usb...done checking usb No Priority Usb checking front key readFrontKey 0 0 Check ignore.update file Checking usbdisk0:/vuplus/solo4k/ignore.update......NO Check force.update file Checking usbdisk0:/vuplus/solo4k/force.update......NO bolt update ...Checking usbdisk0:/vuplus/solo4k/bolt_auto.bin......NO Checking usbdisk0:/vuplus/solo4k/rootfs.tar.bz2......NO ....NO Checking usbdisk0:/vuplus/solo4k/splash_auto.bin......NO Checking usbdisk0:/vuplus/solo4k/kernel_auto.bin......NO Board ID is zero! - You need to hardware fix (ECO) it! BOLT> printenv Variable Name Value -------------------- -------------------------------------------------- BOOT_CONSOLE uart0 SPLASH ENABLE STARTUP batch -fatfs emmcflash0.startup:STARTUP ETH0_PHY INT ETH0_MDIO_MODE 1 ETH0_SPEED 1000 ETH0_PHYADDR 1 ETH0_HWADDR 00:1D:EC:0A:50:05 VERSION 9.99 CHIP_FAMILY_ID 73660020 BOARDNAME BCM97366SFF_bad_MoCA MEMORYSIZE 2048 DT_ADDRESS 761c000 DT_SIZE a2c7 *** command status = 0 BOLT>
Based on the error.. RESET CAUSE: 0x000003 main_chip_input power_on (2 of 22 possible causes) and searching to it, then it is an issue which seems to be more common. I don't know what could be causing this, but I'm thinking a usb related problem, or a hdd. In any case, it seems that there is a weak, or overloaded voltage problem, thinking related to the 5v.
That seems to me to a lightning strike issue or may be a bad connection, or an outdated soldering problem that most likely has to do with the cpu. Sometimes noticeable when there is some pressure on the CPU. An reflow job can work, but without the right tools it is not without risk.